AnalogLamb - ESP32, WiFi, BT and IoT Apps

  Amnos LinkE Breakout Amnos LinkE Breakout can be used for online debugging and downloading of WCH RISC-V MCU, and also for online debugging and downloading of ARM MCU with SWD/JTAG interface. It also comes with a serial port for easy debugging output. Features Support 3.3V/5V dual power output Support USB to TTL serial port function Support RISC-V chip single/dual line download debugging Support ARM MCU with SWD/JTAG interface for downloading and debugging Support firmware auto-detection and upgrade 3.3V/5V output power supply controllable Red and blue LED indicators, easy to view the working status Support the upper computer one key to switch the working mode Development Tools User Manual:  WCH-LinkUserManual-EN.PDF WCH-Link Local Burning Tool:  WCH-LinkUtility.ZIP Integrated Development Environment (IDE):  MounRiver Studio(MRS)

  Polos CH32VXX RISC-V Breakout Boards CH32V Series MCUs are designed by Qinheng Microelectronics Co., Ltd., focuses on connectivity technology and microprocessor research and is an IC design company. CH32V Series MCUs are low-cost & powerful functions like BT, USB2.0/3.0, CAN, I2C, SPI, USB PD and so on. So we develop the Polos CH32Vxx RISC-V Breakout Boards. Qinheng Provide C/C++ SDK, Arduino Library, and MRS IDE. We perfer to use Embedded Rust, We will support Embedded Rust development in CH32Vxx RISC-V MCU. Polos CH32V003 Breakout Alef - Features Main Chip Type: CH32V003F4U6 with QFN20 Package QingKe 32-bit RISC-V2A processor, Up to 48MHz frequency 2KB SRAM, 16KB Flash, 3.3/5V Power Supply 1 ch DMA, 1 group of OP Amp, 1 group of 10-bit ADC 16 bit timer x 2 USARTx1, I2Cx1, SPIx1 18 I/O ports, mapping an external interrupt 64-bit chip unique ID 1-wire serial debug interface (SDI) Polos CH32V203F8 Breakout Alef - Features Main Chip Type: CH32V203F8P6 with TSSOP20 Package Qingk...

  AnalogLamb Zynq 7100 FPGA Development Board has up to 444K logic cells and 2020 DSP slices, integrate Dual ARM Cortex-A9 MPCores, up to 1GHz , provide 2GB 64bit DDR3 , up to 1600Mbps for PL and 1GB 32bit DDR3, up to 1066 for PS. 8GB eMMC for PS Storage. It has too much interface your need, for example PCIe, 1Gbps Ethernet, HDMI, USB2.0, UART, FMC and so on. It is very suitable for new idea verification. https://www.analoglamb.com/product/dev-fpga0010-xilinx-zynq-7100-fpga-development-board/ Chip Specification The Zynq®-7000 SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. ZYNQ XC7Z100 Resources Logic Cells - 444K DSP Slices - 2020 Memory - 26.5Mb GTX Transceivers - 16 I/0 Pins - 400 Board Specification FPGA - Xilinx ZYNQ XC7Z100-FFG900 Chip Dual ARM Cortex-A9 MPCores, up to ...

  VisionFive is the first generation of affordable RISC-V computers designed to run Linux. It is fully open-source with open-source software, open hardware design and RISC-V open architecture. It is powered by RISC-V SiFive U74 Dual-Core 64-bit RV64GC ISA SoC with 4GB/8GB LPDDR4 RAM variants and has rich I/O peripherals such as USB 3.0 ports, 40-pin GPIO header, Gigabit Ethernet Connector, Micro-SD card slot and much more. VisionFive also has rich AI features with Neural Network Engine and NVDLA Engine. It has onboard audio and video processing capabilities and has MIPI-CSI and MIPI-DSI connectors for video hardware. It has wireless capabilities with Wi-Fi and Bluetooth (BLE) and has a wide software compatibility including support for Fedora. Board Specification Interface

DEV-LNX0003 - VisionFive RISC-V Linux AI Board with 8GB LPDDR4 &U74 Dual Cores Buy it on AnalogLamb.Com, Click Here Board Overview VisionFive is the first generation of affordable RISC-V computers designed to run Linux. It is fully open-source with open-source software, open hardware design and RISC-V open architecture. It is powered by RISC-V SiFive U74 Dual-Core 64-bit RV64GC ISA SoC with 4GB/8GB LPDDR4 RAM variants and has rich I/O peripherals such as USB 3.0 ports, 40-pin GPIO header, Gigabit Ethernet Connector, Micro-SD card slot and much more. VisionFive also has rich AI features with Neural Network Engine and NVDLA Engine. It has onboard audio and video processing capabilities and has MIPI-CSI and MIPI-DSI connectors for video hardware. It has wireless capabilities with Wi-Fi and Bluetooth (BLE) and has a wide software compatibility including support for Fedora. Board Specification Interface Pinout Diagram Software Development Linux with Fedora Rootfs