AnalogLamb - ESP32, WiFi, BT and IoT Apps

AnalogLamb XC7K325T FPGA Development Board has up to 356K logic cells and 1440 DSP slices, provide one pcs 64bit DDR3 SODIMM, up to 1600Mbps. It has too much interface your need, for example PCIe, SATA, HDMI, SFP, UART, FMC and so on. It is very suitable for new idea verification. https://www.analoglamb.com/product/dev-fpga0009-xilinx-kintex-7-xc7k325t-fpga-development-board/ Chip Specification Kintex®-7 FPGAs provide your designs with the best price/performance/watt at 28nm while giving you high DSP ratios, cost-effective packaging, and support for mainstream standards like PCIe® Gen3 and 10 Gigabit Ethernet. The Kintex-7 family is ideal for applications including 3G and 4G wireless, flat panel displays, and video over IP solutions. XC7K325T Resources Logic Cells - 356160 DSP Slices - 1440 Memory - 25740 GTX Transceivers - 24 I/0 Pins - 300 Board Specification FPGA - Xilinx XC7K325T-FFG676-21 Chip DDR3 - 64bit Notebook SODIMM Supports Max DDR16000 & 16GB Memory PCIe - PCIe Gen2.0 ...

  VisionFive is the first generation of affordable RISC-V computers designed to run Linux. It is fully open-source with open-source software, open hardware design and RISC-V open architecture. It is powered by RISC-V SiFive U74 Dual-Core 64-bit RV64GC ISA SoC with 4GB/8GB LPDDR4 RAM variants and has rich I/O peripherals such as USB 3.0 ports, 40-pin GPIO header, Gigabit Ethernet Connector, Micro-SD card slot and much more. VisionFive also has rich AI features with Neural Network Engine and NVDLA Engine. It has onboard audio and video processing capabilities and has MIPI-CSI and MIPI-DSI connectors for video hardware. It has wireless capabilities with Wi-Fi and Bluetooth (BLE) and has a wide software compatibility including support for Fedora. Board Specification Interface

DEV-LNX0003 - VisionFive RISC-V Linux AI Board with 8GB LPDDR4 &U74 Dual Cores Buy it on AnalogLamb.Com, Click Here Board Overview VisionFive is the first generation of affordable RISC-V computers designed to run Linux. It is fully open-source with open-source software, open hardware design and RISC-V open architecture. It is powered by RISC-V SiFive U74 Dual-Core 64-bit RV64GC ISA SoC with 4GB/8GB LPDDR4 RAM variants and has rich I/O peripherals such as USB 3.0 ports, 40-pin GPIO header, Gigabit Ethernet Connector, Micro-SD card slot and much more. VisionFive also has rich AI features with Neural Network Engine and NVDLA Engine. It has onboard audio and video processing capabilities and has MIPI-CSI and MIPI-DSI connectors for video hardware. It has wireless capabilities with Wi-Fi and Bluetooth (BLE) and has a wide software compatibility including support for Fedora. Board Specification Interface Pinout Diagram Software Development Linux with Fedora Rootfs

  DT-BL10 - BL602 RISC-V WiFi&BT Board Overview BL602 is an 32-bit RISC-V WiFi and Bluetooth LE SoC for low-power IoT applications. Moreover, variety of security features are supported. Peripheral interfaces include SDIO, SPI, UART, I2C, IR remote, PWM, ADC, DAC, ACOMP, PIR, etc. Flexible GPIO configurations are supported. BL602 has total 16 GPIOs. Chip Specifications: MCU subsystem – 32-bit RISC-V CPU with FPU with dynamic frequency from 1MHz to 192MHz, L1 cache Memory – 276KB SRAM on-chip Storage 128KB ROM, 1Kb eFuse, and optional Embedded Flash on-chip XIP QSPI flash support Wireless Wi-Fi 4 – 802.11 b/g/n @ 2.4 GHz Bluetooth 5.0 LE Wi-Fi Fast connection with BLE assistance Wi-Fi Security – WPS/WEP/WPA/WPA2/WPA3 STA, SoftAP, and “sniffer” modes Integrated RF balun, PA/LNA WiFi Tx: 21 dBm; WiFi Rx: -98 dBm Peripherals and I/Os SDIO 2.0 slave (AP-Host) SPI master/slave, 2x UART, I2C master/slave, 5x PWM channels ADC – 10-bit general DAC, 12-bit general ADC, 2x general analog c...