Posts

Showing posts from August, 2017

ESP32 Module & Boards On Sale from AnalogLamb

1. ESP-32S-ALB                    3.49USD/PCS https://www.analoglamb.com/product/esp-32s-alb/ 2. ESP32-WROVER              9.99USD/PCS https://www.analoglamb.com/product/esp32-wrover/ 3. ALB32-WROVER               9.99USD/PCS https://www.analoglamb.com/product/alb32-wrover-esp32-module-with-64mb-flash-and-32mb-psram/  4. ESP32S Breakout               1.00USD/PCS https://www.analoglamb.com/product/es32s-breakout/ 5. Maple ESP32 Board            15.9USD/PCS https://www.analoglamb.com/product/maple-esp32/ 6. ESP32 Development Board   12.9USD/PCS https://www.analoglamb.com/product/esp32-development-board/ 7. ESP32 Test Fixer                   18.8USD/PCS https://www.analoglamb.com/product/esp32-test-fixture-esp32-board/ 8. ESP32 WROVER KIT            47USD/PCS https://www.analoglamb.com/product/esp-wrover-kit-esp32-wrover-module/ What do you need to develop ESP32? Please visit www.analoglamb.com or AnalogLamb​

Introduction of ESP32-WROVER - Espressif 's ESP32 Module with 32Mb PSRAM and Flash - AnalogLamb.Com

Image
ESP32-WROVER - ESP32 Module with 32Mb Flash and 32Mb PSRAM Buy it On AnalogLamb.Com Description: ESP32-WROVER Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP32-WROVER integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks & Times, abundant peripheral Interfaces and sercurity mechanism.   ESP32-WROVER Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video steaming for camera, Wi-Fi & Bluetooth enabled devices, Home automation and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides. ESP32-WROVER Feature: ESP32 Wi-Fi and Bluetooth combo chip

ESP-WROVER-KIT – 4MB PSRAM & Flash with TFT LCD, JTAG, ESP32-WROVER Module - AnalogLamb.Com New Product

Image
ESP-WROVER-KIT – 4MB PSRAM & Flash with TFT LCD, JTAG, ESP32-WROVER Module Go to AnalogLamb.com to Buy it Now Overview of ESP-WROVER-KIT The ESP-WROVER-KIT is a newly-launched development board built around ESP32. This board is compatible with ESP32 modules, including the ESP-WROOM-32 and ESP32-WROVER. The ESP-WROVER-KIT features support for an LCD and MicroSD card. The I/O pins have been led out from the ESP32 module for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 through the USB interface. The development board makes secondary development easy and cost-effective. Features ESP32-WROVER module with 4MB PSBRAM, 4MB FLASH 3.2″ TFT LCD display MicroSD card connector Micro USB connector Built-in JTAG and UART interface FTDI FT2232HL RGB LED Two buttons JTAG connector IO 48 pin 0.1″ step connector 5V power supply jack ON/OFF switch The kit can